Upgrade to 6.35.10.18 Radio and 1.76.2007 SPL
Prerequisites:
- HTC Magic / Sapphire 32A
- Engineering SPL
----- 1.33.2005
----- 1.33.2009
----- 1.33.2010
----- If you boot into fastboot and have issues with "fastboot:remote not allow", then your SPL won't work. Upgrade to Engineering SPL before continuing.
----- If you do not have an Engineering SPL, download 1.33.2010 and flash through recovery before starting this procedure. Flash the SPL update.zip like any other update.zip file.
- Working ADB/Fastboot Drivers
- Basic knowledge or modding your phone
You will need:
- The 1.76.2007 SPL HBOOT image
http://www.theandroidkitchen.com/fil...-1.76.2007.img
- The 6.35.10.18 Radio Image
http://www.theandroidkitchen.com/fil...6.35.10.18.img
- The Amon_RA Hero Recovery (Latest version is 1.5.2 as of this post)
http://forum.xda-developers.com/showthread.php?t=561124
MD5SUMS - thanks march83!
hboot-1.76.2007.img 841eebbffaead7296a50a39920ec30a2
Radio_HTC_PVT_32A_6.35.10.18.img 246a858689a19975bfdcfa5538401c5f
Notes:
- This Radio and SPL is only for the new Sense UI ROMs (CursorSense32A)
- The Hero recovery is required for the new radio. The Sapphire H (Magic 32A) recovery will reboot after a few seconds.
- To select items using the Hero recovery, you need to use the green Talk/Send key on your device. The trackball select key will not work.
Steps:
- Download the files above onto your computer. Save them in the same folder (C:\AndroidSDK\Tools for example)
- Turn off your phone
- Power it on into recovery (hold Home and press Power)
- Run a full nandroid backup (optional, but recommended)
- Turn off your phone
- Power it on into FASTBOOT mode by holding Back and pressing Power
- Plug in a USB cable. you should see FASTBOOT USB on the screen
- From a command prompt, navigate to the folder where you saved the files above.
- Type in these commands:
Code:
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img fastboot flash hboot hboot-1.76.2007.img fastboot flash recovery recovery-RA-hero-v1.5.2.img fastboot erase system -w fastboot reboot-bootloader
- Verify that you now have the 6.35.10.18 Radio and 1.76.2007 SPL.
CONGRATULATIONS! You can now flash the CursorSense32A ROM!
There will be other ROMs soon that use this Radio and SPL. It's just a matter of time.
Upgrade from 6.35.07.29 to a new version
You can upgrade radio version from 6.35.07.29 to 6.35.08.29 or 6.35.10.18 without wiping, reflashing or losing any data.
- Download the radio image
6.35.08.29
6.35.10.18
- Save the radio update.zip file to the root of your SD card.
- Boot into Recovery mode, using Home and Power and apply the update like you would any other update.zip file.
Downgrade (Revert back to) 32A 3.22 Radio and SPL
You will need:
- 1.33.2010 Engineering SPL HBOOT image
http://www.theandroidkitchen.com/fil...-1.33.2010.img
- 3.22.20.17 Radio image
http://www.theandroidkitchen.com/fil...3.22.20.17.img
- Amon_RA Sapphire H Recovery (Latest is 1.5.2 as of this post)
http://forum.xda-developers.com/showthread.php?t=530492
Steps:
- Download all of the files to the same folder (C:\AndroidSDK\tools for example)
- Turn off your phone
- Power it on into FASTBOOT by holding Back and pressing Power
- In a Command Prompt, navigate to the folder you saved the files in
- Type in these commands:
Code:
fastboot flash radio Radio_HTC_PVT_32A_3.22.20.17.img fastboot flash hboot hboot-1.33.2010.img fastboot flash recovery recovery-RA-sapphire-v1.5.2H.img fastboot erase system -w fastboot reboot-bootloader
- Verify that you now have 3.22.20.17 SPL and 1.33.2010 SPL